Monday, November 22, 2010

Cyanoacrylate Accelerators

...if you don't know what I'm talking about by the title, it's commonly referred to as "Zip Kicker" - when gluing a model, if you apply cyanoacrylate glue ("super" glue or "krazy" glue) to one surface, and give the other surface a quick mist of Zip Kicker, it makes the glue bond & dry almost instantly.  I had no idea how much I had come to depend on Zip Kicker, until I ran out of it - it speeds up build time so much.

My FLGS doesn't actually carry Zip Kicker - I found it when I stopped by a hobby shop near my house that specializes in radio control cars & airplanes - apparently those guys use it a lot.  I grabbed some on a whim, and it turned out to be great stuff.  I stopped by the other day to pick up some more, and, to my horror, the shop had moved across town.  I didn't have the time to drive over there at that moment, so when I had a chance I went online to get what I needed.

The downside of Zip Kicker is that it's kind of expensive -  I was paying something like $7.00 for a 2-oz. spray bottle.  (The good news is that it lasts a looong time).  I was determined not to run out again anytime soon, so I found someone selling an 8-oz. "refill" -sized bottle for around $10:


Another problem: the spray bottle I had previously had a broken pump, so I couldn't refill it.  To solve this, I stopped by the pharmacy department the next time the wife & I went grocery shopping - in the aisle with all the "travel size" items, they sell these 2-oz. spray bottles for 97 cents apiece:


I filled 'em up, then broke out my labelmaker:


(Yeah, I know, the green labels on a green bottle isn't the most readable thing in the world - the green labelmaker cartridges were 50% off, and I'm cheap).  If you use superglue for your models, pick some of this up and give it a try, you won't be disappointed...

5 comments:

  1. hmm, now I want to try this.
    Out of curiosity, wouldn't it be easier to use a toothpick or something rather than a spray?

    ReplyDelete
  2. Dave -

    One of the properties of Zip Kicker is that it evaporates REALLY fast - if you spray some of it on a flat surface, you can actually SEE it evaporating. So, you can't really work with an open dish of it on your table, and I only have two hands for holding the model / holding the piece to be glued / opening the bottle / holding a toothpick / etc. The spray bottle is definitely easier in the long run.

    ReplyDelete
  3. I don't usually use the sprayer anymore. I just twisted the pump out and do a drip from the bottom of the tube. Cleaner and saves a little -- but sometimes, you've just got to use the sprayer! @40kTerrain

    ReplyDelete
  4. wow, got to know about CA accelerator from your post, and its cool! Its now my essentials in metal miniatures assembly. Thanks, Cheers!

    ReplyDelete
  5. This comment has been removed by the author.

    ReplyDelete